I need a solution
Is BE 12.5 compatable with SQL 2012? I get an error when i try to select the SQL server from the selection list. Error: An error was encountered while attempting to browse the contents of microsoft sql server.
↧
Backup Exec 12.5 and SQL server 2012 compatabilty
↧
Restoring individual files/folders from a VM
Copy all the children of the comment that is the source of this new discussion.
I need a solution
Everything I have read and seen says the wrst thing we could do is backup the vm like they were physical servers. That being said I have done that and it works, but it is not the long term solution to my problem.This is all that I see. Right now I only have 1 vm running in my cluster. Raisers Edge is the name of the vm that I am trying to recover files from. I can restore the entire VM and I can restor the vhds. But I have nothing at the file or folder level inside the vm.
7798951
↧
↧
Migrate BE 2010 R3 to BE 2012 (new server)
I need a solution
Is there any guideline for migrating a BE 2010 R3 to BE 2012 running in a new server?
↧
Space required for snapshot in Hyper-V
I need a solution
Hi,
I have a query.
I have the following:-
1. BE 2012 on Win 2008 R2.
2. Hyper-V Host server on win 2008 R2.
3. 7-8 number of VMs running on each Hyper-V host server.
My query is how much free space is required for taking snapshot backup of hyper-v in the remote Hyper-V Host server.
Is there any thumb rule or its a just the space of the VMs (all files ) is occupid.
Given a situation a backup of 2 TB for 3 VMS has to be taken, kindly clarify how much of free space is mandatorily required on the host server.
Thanks
↧
Symantec backup exec 2010 R3 backup updating catalogs takes a long time
I need a solution
We run Symantec backup exec 2010 to backup file server, windows 2008 Domain controller, Microsoft SQL 2008 servers, now there is a issue, the backup exec stuck at updating catalogs for a long time, the speed is 32mb/sec, only 22GB backed up, please tell me how this can be resolved, thank you.
↧
↧
Backing up backup exec2012
I need a solution
Hi
i would like to know how to backup my backup exec 2012 settings and backups settings mostly as i need to reinstall windows on the backup server and thus need to reinstall BES2012..
Also what are the steps for reloading these backups
↧
BE 2012 Unable to restore individual mailbox in Exchange 2010
I need a solution
When trying to restore an indivudal mailbox everything is empty in the selection list (see attached picture) under the "Microsoft information store". Backup are ok every day.
I have moved everything over to Exchange 2010 from 2007, and before when i tried to restore from Exch 2007 it worked fine.
I have the Exchange server in one AD domain and the BE 2012 server in another domain but I have truste between them.
I have also tried to install Exchange 2010 Management tool in on the BE 2012 server but that does not help.
If I try ti do an restore of the whoel mailbox databse, I can select it (but have not tried to do a restore) so it seems that it is only problem with restore of the individual mailx or item.
I have GRT enable on exchange agent settings.
I have updatated BE 2012 to latest SPs.
Does anyone have any idea what could be the problem ?
Thanks in advance
Johan Mannerstrom
↧
how to recover a deleted AD user with mailbox
I need a solution
hi i have exchange 2010 sp2 mailbox server on which i have user called sam joshua. we are using Backup Exec 2012.
i'm taking regular backup of mailbox server (Full and Incremental Backup) and AD server (Full Backup). The user id has been deleted from the AD. Now what steps i need to take for restoring that user with mailbox.
should i restore User from AD backup first and then Mailbox.
Regards
Devang
↧
Sharepoint GRT data index catalog job very very slow
I need a solution
Hi everybody, we report the following problem: the meta-index catalog job, that starts after the backup job of sharepoint server with GRT enabled, run/is very very slowly (less than 5 MB/s) so it is not able to end correctly (we stopped it after 2 days running).
The backup server is BackupExec 2012 SP1 installed on Windows 2008 R2, the backup job of sharepoint run on deduplication storage that stands on local.
Any idea?
Thanks for your help.
0
↧
↧
BE 2012 and Lotus Domino 8.5.3
I need a solution
BE appears to be crashing my Lotus Domino server nightly.. I thought it was compatible now?
Server: Win 2008 R2 enterprise x64
Domino: 8.5.3 FP1
BE: BE 2012 V14.0 Rev 1798
Error on server: (there are two).. then the domino server simply stops.
Any help at all please?
1. Process beremote.exe requested memory dump but the maximum number of memory dumps has already been reached.
2. Faulting application name: beremote.exe, version: 14.0.1798.0, time stamp: 0x4f1e02d7
Faulting module name: bedsnote.dll, version: 14.0.1798.0, time stamp: 0x4f1e02bd
Exception code: 0xc0000005
Fault offset: 0x0000000000059a02
Faulting process id: 0x664
Faulting application start time: 0x01cda3c447c284fb
Faulting application path: C:\Program Files\SYMANTEC\BACKUP EXEC\RAWS\beremote.exe
Faulting module path: C:\Program Files\SYMANTEC\BACKUP EXEC\RAWS\bedsnote.dll
Report Id: 608c44ad-1057-11e2-b69c-a4badb3d8f63
↧
Backup exec error oracle 11GR2 with grid
I need a solution
The error bakcup is: Then oracle database and grid are two roles users
uid=500(oracle) gid=500(oinstall) groups=500(oinstall),501(dba),502(oper),503(asmadmin),504(beoper)
uid=501(grid) gid=500(oinstall) groups=500(oinstall),501(dba),502(oper),503(asmadmin),504(beoper)
Recovery Manager: Release 11.2.0.2.0 - Production on Thu Oct 11 10:57:33 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
ORA-00204: error in reading (block 1, # blocks 1) of control file
ORA-00202: control file: '+DATA1/silwb/controlfile/current.288.796294089'
ORA-15081: failed to submit an I/O operation to a disk
# -----------------------------------------------------------------
# RMAN command section
# -----------------------------------------------------------------
RUN {
ALLOCATE CHANNEL ch0
TYPE 'SBT_TAPE';
SEND 'BSA_SERVICE_HOST=172.16.1.162,NBBSA_TOTAL_STREAMS=1,NBBSA_JOB_COOKIE={0F6C9F56-BEEF-4F92-B482-2A9150D793EB},NBBSA_DB_DEVICE_NAME=Oracle-Linux::\\enoc.usil.edu.pe\SILWB';
BACKUP
INCREMENTAL LEVEL=0
FORMAT 'BE_U'
DATABASE FORCE PLUS ARCHIVELOG FORCE NOT BACKED UP;
RELEASE CHANNEL ch0;
}
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of allocate command at 10/11/2012 10:57:34
ORA-00204: error in reading (block 1, # blocks 1) of control file
ORA-00202: control file: '+DATA1/silwb/controlfile/current.288.796294089'
ORA-15081: failed to submit an I/O operation to a disk
EXIT
Recovery Manager complete.
↧
How to prevent client to enter standby mode while backup exec agent is active?
I need a solution
Hi,
I'm using BE 2010-R3 Rev. 5204 on my Win2K3 serve and same for BE-Agent ob my german Win7 64 bit machine.
How can I prevent that Win7 enters standby mode while a backup job is active? Ok I could reconfigure the client to not use any energy saving setting but this is not a solution, just a work arround. I thought that BE-Agent should be smart enough to handle this itsself.
I read a thread on creating a pre-/post-backup script but don't know how to do this (possibly power script). Unfortunately the solution was not posted to this thread.
Thanks for nay help,
Stefan
↧
Backup Workstations Using Symantec Product
I need a solution
We use Symantec back up exec 2010 to back up our servers, but is there an option to back up certain workstations also? Right now I have windows xp back up utility set to back up certain users software data folders that is on their c drive set to back up to their my docs (which we have pointing to a backed up fileserver). I am new to back up and I did not set up back up exec 2010 that we use for our servers. What does Symantec offer as back up options for PC's that would make backing up and restoring easy or easier than using windows xp back up utility?
↧
↧
A failure occurred querying the Writer status.
I need a solution
Hi All,
So we've had the same backups running for a few months now, then suddenly over the weekend they start to fail with the errors below. These backups include our domain controllers and Intranet, our other seem to be fine. I've gone through a lot of the Symantec knowledge base and have had no success.
Things I've tried:
(1) Restarting both the backupexec server and file server.
(2) Enabling Advanced Open File with forcing it to use Microsoft's Shadow Copy Provider.
(3) Ran "vssadmin list writers" which found 0 errors.
(4) Manually started the shadow copy service on the client server.
V-79-57344-65233 - AOFO: Initialization failure on: "\\192.168.4.98\Shadow?Copy?Components". Advanced Open File Option used: Microsoft Volume Shadow Copy Service (VSS).
Snapshot provider error (0xE000FED1): A failure occurred querying the Writer status.
Check the Windows Event Viewer for details.
Writer Name: Event Logs, Writer ID: {EEE8C692-67ED-4250-8D86-390603070D00}, Last error: The VSS Writer failed. The operation cannot be retried (0x800423f4), State: Failed during prepare snapshot operation (8).
The following volumes are dependent on resource: "C:" .
The snapshot provider used by VSS for volume C: - Microsoft Software Shadow Copy provider 1.0 (Version 1.0.0.7).
V-79-57344-65233 - AOFO: Initialization failure on: "\\192.168.4.98\System?State". Advanced Open File Option used: Microsoft Volume Shadow Copy Service (VSS).
Snapshot provider error (0xE000FED1): A failure occurred querying the Writer status.
Check the Windows Event Viewer for details.
Writer Name: Internet Information Services, Writer ID: {59B1F0CF-90EF-465F-9609-6CA8B2938366}, Last error: The VSS Writer failed, but the operation can be retried (0x800423f3), State: Failed during prepare snapshot operation (8).
Writer Name: Registry, Writer ID: {AFBAB4A2-367D-4D15-A586-71DBB18F8485}, Last error: The VSS Writer ran out of memory or resources (0x800423f1), State: Failed during prepare snapshot operation (8).
The following volumes are dependent on resource: "C:" .
The snapshot provider used by VSS for volume C: - Microsoft Software Shadow Copy provider 1.0 (Version 1.0.0.7).
Please let me know if there's any other information I can provide. I'm not really sure what could have changed in our environment that would cause certain backups to fail suddenly.
7829541
↧
BMR Restore from Recovery CD Fails: "The Backup Exec job engine system service is not responding."
I need a solution
I am attempting to perform a BMR restore of a Windows 2008 R2 64-bit server using the 64-bit recovery disc. The server is virtualized in an ESXi 5.0 (without Update 1) host. The Backup Exec 2012 server software is running at the latest version, Service Pack 1a, with all updates installed, on a Windows 2008 R2 64-bit server.
After selecting from last Friday's full backup, and having already inserted the tape required to do the restore, the backup will connect to the server and begin running. Trust is established, and a temporary machine name like "minint-2a9j4kx" displays in the list of servers on the Backup Exec 2012 server.
The status on the server I'm attempting to restore to shows the backup is running, but the progress stays at 0MB. Eventually the backup fails with the error, "The job failed with the following error: The Backup Exec job engine system service is not responding."
At that point, if I try to restart the services on the Backup Exec server, the restart process will time out with an error that the service is taking a long time to respond. If I reboot the server, the services come back, but if I try the restore again, the problem reoccurs.
↧
Vmware Agente Licensing
I need a solution
I have understood that the agent can vmware backup machine and Restoration Projects, my practice is to restore an application, such as SQL databases, so I need to install the agent GRT Windows agent also need an additional license for Windows or only with vmware license is sufficient.
PD. Use the Symantec Backup Exec 2012.
I await your prompt replies.
Thank you.
↧
Faulting application bengine.exe
I need a solution
Over the past 2 days, some of our backup jobs have been failing. This has been due to the Backup Exec job engine service not responding. Further investigation has found that at approximately 9pm, the following error is logged in the Event logs:
Faulting application bengine.exe, version 14.0.1798.105, time stamp 0x4fa3de72, faulting module bengine.exe, version 14.0.1798.105, time stamp 0x4fa3de72, exception code 0xc0000005, fault offset 0x00000000003f1c8b, process id 0x1200, application start time 0x01cd97aa031f9564.
After which all jobs scheduled after this time fail and are put on hold.
In the mornings, I start the job engine again, remove the hold on the jobs, and they go through to succeed. I need some direction to identify the cause of this issue.
Regards,
Tihaem
↧
↧
Resource: "VMVCB::\\...\....\Server" is not snappable. Attempting to back up directly from the source volume.
I do not need a solution (just sharing information)
Hi Guys, Im getting this message (not error) for all my VMs when backing up:
Note: Resource: "VMVCB::\\vcenterserver\VCGuestVm\(DC)Datacenter(DC)\vm\SERVERNAME" is not snappable. Attempting to back up directly from the source volume.
Firstly this is reported against ALL my VMs and not just SQL and Exchange as most searches I found mentioned.
I guess Im just trying to understand why more than anything else. This isnt an error or causing any VM backups to fail. It works absolutly fine!
Im using BE 2012 SP1 with HF 1897571,180964, 194470. Utilizing the AVVI agent with GRT and GRT for Exchange and SQL. All my remote agents are updated to the latest version. Target is to dedupe using SAN transport.
Here is an form the job log:
Family Name: "Media created 10/11/2012 6:00:07 PM" Backup of "VMVCB::\\server.domain.com.au\VCGuestVm\(DC)Datacenter(DC)\vm\SERVER Backup set #1 on storage media #1 Backup set description: "Colo Prod Servers -VMs Full and Incremental with Full Monthly Duplicated to Tape-Weekly Full" Backup Method: Full - Back up virtual machines The option to enable the restore of individual files and folders from a virtual machine backup was selected for this backup. The Agent for Windows must be installed on the virtual machine to use Granular Recovery Technology to restore data. |
Backup started on 10/11/2012 at 10:38:34 PM.
| Backup Set Detail Information |
|---|
Media Label: IMG004058 GRT backup set folder: \\.pdvfs\SERVER\2\BEData\STHVMDK\IMG004058 Transport mode 'san' was used for the disk 'SERVER.vmdk' Backup Exec has discovered and protected 'C:' on virtual machine 'SERVER.rocla.com.au'. Backup Exec has discovered and protected 'D:' on virtual machine 'SERVER.rocla.com.au'. |
Like I said It doesnt appear to be a problem, backups work fine as do restores but if anyone could shed some more light on it that would be great for my own peice of mind.
thanks!
↧
File name length
I need a solution
Our previous program (was not a symantec product) that we used to back up our files only allowed a certain amount of characters for a file name. This included folder, sub folder and the files contained inside. Therefore, if a file's destination name was too long, it wouldn't be backed up.
Is this the same with symantec?
↧
Backup Exec 2012 Browse failure
I need a solution
Hi all,
I'm new to using Backup Exec 2012 and am in the process of trying to edit/create a Backup job
I'm on a Read only domain controller where I had Backup Exec installed before it was Read only as per required
While on the Home tab, going to create a backup I get straight away
Browse Failure
Failure to browse to 'xxxx.xxx.xxx'
Failed to log on to Microsoft Windows.
Ensure that your logon credentials are correctly entered and that they meet the following minmum:
- member of Backup operators group
- have the log on as batch job privelege
The acutal account I've used to login is a domain account and was used for BackupExec 2010
My question is is that when it looks at the logon account when accessing the server where does it see it as having those priveleges?
Thanks
↧